The software will download some files from the Internet and start automatically. When the download is complete, open the zip pack that you just downloaded to your PC, extract the content to any folder and start the program WiiDownloader.exe.
The SD card needs to be formatted first, if you don't know how to do it follow the steps below. The first step you have to take to modify the wii is to prepare a SD card with all the files inside for editing. If you're sure you've got everything you need, roll up your sleeves and get to work - there's a Wii waiting to be tweaked! Preparing the SD card
Address MAC - go to menu Wii console setup from the console, select the Internet (on the second page of the menu) and go to Information about the Wii console. At the top right is the firmware version (for example 4.3) followed by a letter, which determines the region of the device (for example, E is for Europe, J for Japan, and so on). Firmware version and region - go to menu Wii console setup the consul. You should also obtain technical information about your console, that is, the firmware version installed on it, its region (European, American or Japanese) and its MAC address. Uno Internet connection… active on the PC, it can also be disconnected on the console. A PC Windows in which run the software needed to transfer the exchange files to the SD card. The memory card will need to be formatted, so be sure not to save important files in it. Uno SD card of any capacity (files for editing are less than 1GB). You can also modify a console that has already been modified in the past, no problem. I did the tutorial using a Wii with a 4.3 firmware, so I would recommend that one, but overall, we tend to recommend 4.1. 
Uno Standard Wii until 4.3 firmware (which, however, should be the last released by Nintendo for this system).
0 kommentar(er)
